5 Scan
266
Scan
5
2 While documents are being scanned, select
[Next Original].
Note • When using the document feeder, load the next document after the machine has finished scanning
the first document.
• When [Next Original] is displayed on the screen shown on the right and no operation is performed
for a certain period of time, the machine automatically assumes that there are no more documents.
• You can change the scan settings of the next document by selecting [Change Settings] that is
displayed after selecting [Next Original].
3 Load the next document.
4 Press the <Start> button.
If you have more documents, repeat steps 3
and 4.
5 When all documents have been scanned, select
[Last Original].
To Next Page
Loading...
