2 Product Overview
50
Product Overview
2
Note • The Finisher-B1 is optional. In this guide, the Finisher-A1, Finisher-B1, and Finisher-C1 are referred to
as the "finisher".
• The power cord connected to the Finisher-B1 is a connecting cord dedicated to the machine. Do not
connect this cord to any other devices than the machine.
14 Center tray (Top cover of the
finisher transport)
Copies and prints are delivered here when they are unable to be delivered to
the finisher tray. Pull the cover upward when clearing paper jams.
Note • Remove outputs delivered to the center tray constantly.
No. Component Function
To Next Page
Loading...
Need help?
General
