Fuji Xerox DocuCentre-IV C4475

Copy
99
Copy
3
Selecting this option displays [Color] on the screen. Select a color on the [Output Color -
Color] screen which is displayed after selecting [Color].
Refer to "[Output Color - Color] Screen" (P.100).
[Source Color] Screen
This screen allows you to select one or more colors from your document to define them as
source colors.
1 Select [Dual Color].
2 Select [Source Color].
3 Select [Other than Black] or [Color].
 Other than Black
The colors other than black will be the source colors.
 Color
Allows you to select one or more source colors from six preset options.
[Target Area Color] Screen
This screen allows you to select the target color to be used in place of the source colors
specified in [Source Color]. You can select one color from seven preset and six custom
options.
For information on how to set custom colors, refer to "5 Tools" > "Copy Service Settings" > "Custom Colors" in the
Administrator Guide.
1 Select [Dual Color].