16 Appendix
718
Appendix
16
Printed Time in Force Annotation
The time you specified to print a job, the time at which the print job is started inside the
machine, and the time at which the job is actually printed may not be coincident with one
another depending on the machine status and settings or the content of the print job. The
time printed in Force Annotation is the time at which the print job is started inside the
machine.
Stored Programming
The following features and operations cannot be registered on a stored program.
- Registration and call of a stored program
- EP Diagnostic Request
- System Settings
- The [Media Print -Text] and [Media Print - Photos] buttons on the Services Home screen
- The [Store to USB] button on the Services Home screen
- The [Network Scanning], [Job Flow Sheets], and [Web Applications] buttons on the
Services Home screen (ApeosPort Series Models only)
- A custom button to which the Network Scanning or Job Flow feature is assigned
(ApeosPort Series Models only)
- Address Book for the Fax/Internet Fax, E-mail, and Scan to PC services
- Buttons that cannot be selected
- The [Language] button on the Services Home screen
- The [Screen Brightness] button on the Services Home screen
- The [Browse] button of the Scan to PC service
- Address editing operation of the E-mail service ([Remove], [Edit], and [Close Menu] on
the pop-up menu)
-
The <Po
wer Saver>
button
After registering a program, you may not be able to retrieve the stored program correctly
if you execute the following operations:
- If a Watermark is registered on the program, and you change the default value of the
Watermark after registering the program
- If a passcode of a folder that is subject to operation by a stored program is changed
after the program is registered
- If the settings of the control panel are changed
- If the features registered on the custom buttons are changed
- If the setting is changed with [Tools] > [System Settings] > [Copy Service Settings] >
[Preset Buttons]
- If the program is selected from a list of a job flow or the Address Book
- If a button no longer functions as a result of a change of optional components such as
Finisher
- If the measurement unit such as mm or inch is changed
- If a file is selected from a file list with Job Status
- The use of a scrolling bar when you select an item
Output Color
When you select [Auto Detect] in [Output Color] for a copy job or select [Color] in [Output
Color] for a print job, the machine may consume yellow, magenta, and cyan toner cartridges
and drum cartridges even when your document is black and white.
In addition, when [Background Suppression (Color Copy)] is set to [High Speed] under
[Tools] > [System Settings] > [Common Service Settings] > [Image Quality Adjustment],
yellow, magenta, and cyan toner cartridges and drum cartridges are always used. Thus these
To Next Page
Loading...
Need help?
General
