Fuji Xerox DocuCentre-V C4476 Administrator's Guide

15 Problem Solving
474
Problem Solving
15
Printing is slow. [High Resolution] is selected
for [Image Quality].
When image data, such as photos, is printed
with the high resolution, the print speed
becomes slow. Select [Standard] for [Image
Quality].
The specified
print options are
not enabled.
The print driver for another
model is used.
Install the print driver for the model.
The required optional kit is
not installed on the machine.
Check the optional components installed on
the machine, and set [Installable Options]
under [Configuration] in the print driver
again.
The document
edges are missing
on the printout.
The image is larger than the
printable area.
Expand the printable area of the machine, or
reduce the image size on the printout.
The output color
differs between
Secure Print and
Print Stored File.
This is because the print path
is different. The output color
of Print Stored File is
reproduced by the presence
or absence of dots, as with
copying or faxing. On the
other hand, the output color
of Secure Print is reproduced
using density by default, as
with printing.
To closer match the color of Secure Print and
files in folder, select [On] in [Image Options]
> [Print Page Mode] on the [Advanced] tab of
the print driver settings.
The print color
differs from
before.
The color calibration is
incorrect.
Execute auto calibration.
Refer to "Executing Calibration" (P.107).
Black lines are
printed.
A print driver for another
machine is used.
Install the print driver for your machine.
Symptom Cause Remedy

Fuji Xerox DocuCentre-V C4476 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-V C4476
Category	All in One Printer
Language	English