Fuji Xerox DocuCentre-V C4476 Administrator's Guide

3 Maintenance
88
Maintenance
3
1 Make sure that the machine is not operating,
and open the finisher front cover.
2 Pull the staple cartridge out of the finisher.
3 After you pull out the staple cartridge, check
inside of the finisher for any remaining staples.
4 Pinch both sides of the empty staple case with
your fingers (1), and remove the staple case
from the cartridge (2).
5 Insert the front side of the new staple case into
the staple cartridge (1), and then push the rear
side into the cartridge (2).

Fuji Xerox DocuCentre-V C4476 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-V C4476
Category	All in One Printer
Language	English