1 Before Using the Machine
20
Before Using the Machine
1
4
Press the main power switch to the [ ] position to switch off the main power.
5
Connect the network cable to the Ethernet interface connector.
When the Gigabit Ethernet (optional) is
installed.
When the Gigabit Ethernet (optional) is NOT
installed.
Note • Always use the correct network cable with your network connection. When you replace the cable,
contact our Customer Support Center.
6
Press the main power switch to the [ | ] position to switch on the main power.
7
Close the machine front door.
8
Press the power switch to switch on the power.
For more information on setting items, refer to "Printer Environment Settings" (P.315).
To Next Page
Loading...
