1 Before Using the Machine
28
Before Using the Machine
1
If you select [(Not Assigned)], the position of the selected button becomes blank.
You cannot assign [Setup] to [(Not Assigned)]. If you do not want to display the [Setup]
button, select the [Show this in Admin mode] check box.
1
Press the <Log In/Out> button.
2
Enter the system administrator’s user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator’s passcode,
and select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3
Select [Tools] on the Services Home screen.
Note • When the Services Home screen is not
displayed on the touch screen, press the
<Services Home> button.
4
Select [System Settings] > [Common Service
Settings] > [Screen/Button Settings].
5
Select [Services Home - Additional Features],
and then select [Change Settings].
6
Select the position where you want to assign an
additional feature.
Note • The layout of the buttons in this screen
corresponds to the layout of those on the
Services Home screen.
To Next Page
Loading...
