9
C3 Finisher C3 Finisher with Booklet
Maker
C3 Finisher with Booklet Maker +
Folder Unit CD1
D2P Finisher with Booklet Maker
+ D2 Folder Unit
Stapling thickness 50 sheets 50 sheets 50 sheets*
1
100 sheets*
1
Punch 2/4 hole punch*
2
or
2/3 hole punch*
3
2/4 hole punch*
2
or
2/3 hole punch*
3
2/4 hole punch*
2
or
2/3 hole punch*
3
2/4 hole punch or
3 hole punch*
4
Saddle Staple —
Single Fold —
Tri-fold — —
*
5
*
6
Z Fold Half sheet — —
*
5
*
6
Tray
capacity
*
7
Output tray 500 sheets 500 sheets 500 sheets 500 sheets
Finisher tray 3000 sheets 1500 sheets 1500 sheets 2000 sheets
Extra Functionality
in Finishing
A3 oversized tray is also
available
The High Capacity Feeder B1-S is also
available to accommodate up 2000
sheets* sized 330 x 488 mm, in weights
ranging from 64 to 300 gsm. The Air
Assist feature ensures stable feeding
of media such as coated paper. The
upper section can be used to house
consumables.
* 80 gsm paper.
Standard Capacity of
3260 Sheets
The standard configuration can hold
a total of 3260 sheets - 3010 sheets*
in four trays and 250 sheets* in bypass
tray. In addition, an optional High
Capacity Feeder which can hold up to
2000 sheets* of A4-size media (one
tray) is available. It can also support
large-volume output demands.
* 80 gsm paper.
*1: Staple capacity decreases when Z-fold sheets are mixed.
*2: 2/4 Hole Punch Kit for C3 Finisher is required.
*3: US 2/3 Hole Punch Kit for C3 Finisher is required.
*4: 3 Hole Punch Kit is required. 2/4 Hole Punch Kit cannot be attached at the
same time.
*5: Folder Unit CD1 is required. Can also be installed on C3 Finisher.
*6: D2 Folder Unit is required.
*7: 64 gsm paper in A4 size.
Note: C3 Finisher or C3 Finisher with Booklet Maker requires Transport Unit V1.
Stapling*
1
Stapling multiple pages
documents, such as meeting
materials into sets, is
available.
Punch
A hole punch process can be
used for filing documents in
binders.
Saddle Staple
This Single Fold and stapling
process is ideal for creating
catalogues and booklets.
Z Fold Half sheet*
2
Z Fold Half sheet is a useful
method to combine A3
documents into A4 size.
Tri-fold*
2
The C-fold is useful when
creating materials enclosed
in envelopes.
*1: Dual / four-position stapling (parallel) is available with D2P Finisher with Booklet Maker.
*2: Folder Unit is required.
A “Z Fold Half sheet” folding capability is now available.
Further Finishing Functions with Introduction of our new finishers that supports “Tri-fold”
To Next Page
Loading...
Need help?
General
