Fuji Xerox DocuPrint 2050 - Page 144

Chapter 4 Disassembly/Assembly and Adjustment
4.2 Disassembly/Assembly
4-30
<Replacement>
Perform the removal procedures in the reverse order.
NOTE
Wind the harness of CLUTCH REGI ROLL A (PL4.1.42) into the notch on the frame
of the REGISTRATION ASSY once.
NOTE
When attaching the REGISTRATION ASSY, lift the REGISTRATION ASSY using
the straight-head screwdriver and attach the ACTUATOR REGI D (PL4.1.43) of
REGISTRATION ASSY to the under part of ACTUATOR ASSY REGI (PL4.1.19).
NOTE
After attaching the REGISTRATION ASSY, confirm opening and shutting of the MSI
ASSY.
15)-1
15)-1
15)-1
15)-1
AZS431CA
15)-2
ACTUATOR REGI D
ACTUATOR ASSY REGI
Hole
Winding once
14)-1
14)-2
Boss