Error Code
449
Problem Solving
13
026-706
[Cause] Attempted to print a DocuWorks document of which printing is
prohibited.
[Remedy] Release the print prohibited settings using DocuWorks Viewer,
and then execute the operation again.
026-707
[Cause] When processing password-protected DocuWorks documents,
the password entered does not match that of the DocuWorks
document.
[Remedy] Set the correct password on ContentsBridge.
026-708
[Cause] Exceeded the maximum limit for the scan data size that can be
stored for one job with Store & Send Link.
[Remedy] Take one of the following measures:
1) Reduce the resolution (scan quality) of the scan parameters
and execute the operation again.
2) Reduce the image with magnification of the scan parameters
(such as A3 > A4) and then execute the operation again.
3) If [Store & Send Link - Maximum File Size] is set to a small
value, increase the value.
026-709
[Cause] The capacity of the hard disk that can be used to store scan data
with Store & Send Link is insufficient.
[Remedy] Wait around one day, and when capacity becomes available as a
result of the automatic deletion of files, execute the operation
again.
026-710
[Cause] The machine received an S/MIME mail encrypted by an
encryption method that the machine does not support.
[Remedy] Take one of the following measures:
z
Ask the sender to send the mail encrypted by 3DES.
z
Disable FIPS140 validation mode of the machine.
026-711
[Cause] Exceeded the maximum size allowed for a multi-page file when
scanning.
[Remedy] Take one of the following measures:
1) Reduce the resolution (scan quality) of the scan parameters
and execute the operation again.
2) Reduce the number of document pages and then execute the
operation again.
The maximum size is 2 GB for TIFF, XPS, and PDF, and 1 GB for
XDW.
026-712
[Cause] An error occurred while operating from CentreWare Internet
Services.
[Remedy] Retry after waiting for a while.
026-718
[Cause] Incompatible print parameters are used. The combination of the
specified features such as Document Size, Paper Size, Paper
Tray, 2 sided printing, and Output Tray is incompatible.
[Remedy] Confirm the print data, and try printing again.
026-719
[Cause] An error occurred while operating the Store to USB service.
[Remedy] Wait for a while and execute the operation again. If the error still
is not resolved, contact our Customer Support Center.
026-720
[Cause] The capacity of the USB memory device of the recipient is
insufficient while performing the Store to USB service.
[Remedy] Confirm the amount of available space.
Error Code Cause and Remedy
To Next Page
Loading...
