FujiFilm FinePix F11 - Selecting Camera Settings

63
Advanced Features
3
62
ERASE ER A SE FRAMEFR A ME
FRAMEFRA M E
ALL FRAMESAL L F R AM E S
1
2
1Press the “w” button to turn the camera on in
Playback mode.
2Press the “MENU/OK” button to display the
menu on the LCD monitor.
2
1Press “a” or “b” to select “Ò” ERASE.
2Press “c”.
Erased frames (files) cannot be recovered. Back up
important frames (files) onto your PC or another
media.
3
1Press “a” or “b” to select “FRAME” or “ALL
FRAMES”.
2Press the “MENU/OK” button.
01 02
1
01 02
ALL FRAMES
Erases all unprotected frames (files).
Back up important frames (files) onto your PC or
another media.
FRAME
Erases only the selected frame (file).
ERASEER A SE
FRAMEFRA M E
ALL FRAMESAL L F R AM E S
1
2
01 02
Ò ERASING SINGLE / ALL FRAMES
PLAYBACK MENU
“DPOF SPECIFIED. ERASE OK ?” appears when erasing a frame (file) with DPOF setting.
Press the shutter button down halfway. The AF
frame appears positioned on the high-contrast
subject near the center of the image.
When the camera has difficulty focusing on the
subject in “MULTI” mode, set the AF mode to
“CENTER” and use AF/AE lock (➡P.25).
250250250 F5.6F5.6F5.6
250250250 F5.6F5.6F5.6
When there is no high-contrast subject
in the center of the LCD monitor
For a high-contrast subject in
the center of the LCD monitor
PHOTOGRAPHY MENU
PHOTOGRAPHY MENU
NNN
101010
Ó CONTINUOUS
The camera continues to focus on the main subject
in the AF frame.
Use this mode to take pictures of a moving subject.
◆
Notes on continuous AF
◆
Because the camera focuses continuously without pressing the shutter button, note the
followings:
i The battery level (power consumption) increases because data is being overwritten in the camera’s
internal memory.
i If the Auto power off function is set to “OFF”, particular attention must be given to the battery level.
✽ Displaying the menus (➡P.52)