105
Viewing Images
6
104
6.3 CONNECTING TO A PC
The “Connecting to a PC” section explains how to connect the camera to your PC using the USB
cable (mini-B) and describes the functions you can use once the camera and PC are connected.
If the power cuts out during data transmission, the data will not be transmitted correctly. Always use the
AC power adapter when connecting the camera to a PC.
Refer to Section 5 the first time you connect the camera to your PC.
Install the software first. Do not connect the camera to the PC before installing
all the software.
This mode provides a simple way to read images from an xD-Picture Card and store images onto
an xD-Picture Card.
CD-ROM
(Software for FinePix
CX)
¶
DSC
(
Mass storage device
)
mode
6.3.1
Connecting to a PC
1
Insert an xD-Picture Card into the camera.
Gold marking
Gold contact areaGold contact areaGold contact areaGold contact areaGold contact area
Continued
1Press the “
w” button for about 1 second to turn
the camera on in Playback mode.
2Select “¶” DSC in “ò” USB MODE in the
“˜” SET-UP menu (➡P.86).
3Press the “POWER” button to turn the camera
off.
2
DSCDS C
NTSCNT S CNT S CNTSC
SETSE T
SETSE T
SETSE T
ENGEN GLILI SHS H
1
2
3
4
01
02
03
1Plug the USB cable (mini-B) into the USB socket
of the terminal adapter.
2Plug the AC power adapter connector into the
“DC IN 5V” socket of the terminal adapter and
then plug the AC power adapter into the power
outlet.
3
01
02
●
!
Press the “DISP/BACK” button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop midway through. When
printing stops midway, briefly turn the camera off and then on
again.
“PRINT OK?” appears on the LCD monitor.
Press the “MENU/OK” button to download the data
to the printer and start printing the specified
number of prints.
1Check that “PRINTING” is not displayed on the
camera’s screen.
2Turn the camera off. Unplug the terminal
adapter.
6.2 CONNECTING THE CAMERA DIRECTLY TO THE PRINTER
— PictBridge FUNCTION
●
!
“PRINT WITH DATE” is not available when the camera is
connected to a printer that does not support date printing.
6
1Press “a” or “b” to select “PRINT WITH DATE”
or “PRINT WITHOUT DATE”. If “PRINT WITH
DATE” is selected, the date is imprinted on your
prints.
2Press “c”.
PPI CTCT B RIR I DGEGE
PRP RI NTNT W I THT H DATED AT E
PRP RI NTNT W I T H OUTOU T DATED AT E
PRP RI NTNT DPOFD P O F
OKO K
01 02
●
!
Movie images cannot be printed.
●
!
Images photographed with a camera other than FinePix F11
may not be printed.
7
1Press “d” or “c” to display the frame (file) for
which you want to specify PRINT settings.
2Press “a” or “b” to set a value up to 99 as the
number of copies of the frame (file) to be printed.
For frames (files) that you do not want printed,
set the number of prints to 0 (zero).
To specify more PRINT settings, repeat steps 1
and 2.
3Always press the “MENU/OK” button after the
settings are completed.
YESYE S
CANCELCA N CE L
FRAMEFRA M E
TOTALTO TA L
00019
SHEETSSH E ET S
01
01 0302
8
PRIR I NT INGNG
CANCELCA N CE L
1/19
SHEETSSH E ET S
Disconnecting the printer
To Next Page
Loading...
