FujiFilm FinePix F300EXR - Connections; Completing and Resetting DPOF Orders

60
Printing Pictures via USB
3
Repeat steps 1–2 to complete the
print order. Press MENU/OK to save
the print order when settings
are complete, or DISP/BACK to exit without
changing the print order.
4
The total number of prints is
displayed in the monitor. Press
MENU/OK to exit.
The pictures in the current
print order are indicated by a
x icon during playback.
A Note
• Remove the memory card to create or modify a print
order for the pictures in internal memory.
• Print orders can contain a maximum of 999 pictures.
• If a memory card is inserted
containing a print order
created by another camera, the
message shown at right will
be displayed. Pressing MENU/OK
cancels the print order; a new
print order must be created as described above.
• Whether WITH DATE y/WITHOUT DATE is
available may depend on the printer setting. Check
the printer.
■
■
RESET ALL
RESET ALL
To cancel the current print
order, select RESET ALL in the
r PRINT ORDER (DPOF)
menu. The confirmation
shown at right will be
displayed; press MENU/OK to remove all pictures
from the order.
YES CANCEL
RESET DPOF OK?
YES CANCEL
RESET DPOF OK?
YES CANCEL
RESET DPOF OK?
YES CANCEL
RESET DPOF OK?