FujiFilm FinePix F300EXR - Menus; White Balance Notes and Custom WB

77
Menus
Using the Menus: Shooting Mode
A Note
• At settings other than Q, auto white balance is
used with the flash. Turn the flash off (pg. 38) to take
pictures at other settings.
• Results vary with shooting conditions. Play pictures
back after shooting to check colors in the monitor.
■
■
Q
Q
: Custom White Balance
: Custom White Balance
Choose Q to adjust white balance for unusual
lighting conditions. The options will be displayed;
frame a white object so that it fills the monitor
and press the shutter button all the way down to
measure white balance.
If “COMPLETED!” is displayed, press MENU/OK to
set white balance to the measured value. This
value is stored even when the battery is removed
and can be reselected by pressing MENU/OK when
custom white balance options are displayed.
If “UNDER” is displayed, raise exposure
compensation (pg. 36) and try again.
If “OVER” is displayed, lower exposure
compensation and try again.
B Tip
• To give a deliberate color cast to your photographs,
measure a value for custom white balance using a
colored instead of a white object.