CONT.)
New pictures are stored in image les named using a four-digit le num-
ber assigned by adding one to the last le number used. The le num-
ber is displayed during playback as shown at right. B FRAME NO. con-
trols whether le numbering is reset to 0001 when a new memory card
is inserted or the current memory card or internal memory is formatted.
Directory
number
File
number
Frame number
CONTINUOUS
Numbering continues from the last le number used or the rst available
le number, whichever is higher. Choose this option to reduce the num-
ber of pictures with duplicate le names.
RENEW
Numbering is reset to 0001 after formatting or when a new memory card
is inserted.
If the frame number reaches 999-9999, the shutter release will be disabled (
If the frame number reaches 999-9999, the shutter release will be disabled (P
but does not reset the le
but does not reset the le
Frame numbers for pictures taken with other cameras may di er.
Frame numbers for pictures taken with other cameras may di er.
)
Adjust the volume of the sounds produced when camera controls are operated. Choose eOFF
(mute) to disable control sounds.
)
Adjust the volume of the sounds produced when the shutter is released. Choose eOFF (mute)
to disable the shutter sound.