Continuous Shooting
To capture motion in a series of pictures, press MENU/OK,
select RCONTINUOUS in the shooting menu(P 85),
and choose from the options listed in this section.
R The ash turns o automatically. The previously selected ash mode is restored
when OFF is selected for R CONTINUOUS.
R Frame rate varies with shutter speed.
R Focus and exposure are determined by the rst frame in each series.
R The number of pictures that can be taken in a single burst varies with the scene
and camera settings. The number of pictures that can be recorded depends on the
memory available.
■ ITOP n
The camera takes photographs while the shutter button is pressed. To choose
the frame rate and maximum number of shots per burst:
1
Press the selector right when the camera is in shooting
mode.
2
Highlight the current frame rate or number of shots and
press the selector right, then press selector up or down
to choose a new value and press MENU/OK to select.
3
Press DISP/BACK to return to shooting mode when settings are complete.
CONTINUOUS SHOOTING SETUP
NUMBER OF FRAMES 4
SHOOTING SPEED
To Next Page
Loading...
