FujiFilm FinePix F600EXR - D White Balance

88 Menus
Using the Menus: Shooting Mode
D
D
WHITE BALANCE
WHITE BALANCE
(
(
defaults to
defaults to
AUTO)
AUTO)
If AUTO does not produce natural colors (for example, when taking close-ups), select h and
measure a value for white balance or choose the option that matches the light source.
Option
Option
Description
Description
AUTO
AUTO White balance adjusted automatically.
h
h
Measure a value for white balance.
i
i
For subjects in direct sunlight.
j
j
For subjects in the shade.
k
k
Use under “daylight”  uorescent lights.
l
l
Use under “warm white”  uorescent lights.
m
m
Use under “cool white”  uorescent lights.
n
n
Use under incandescent lighting.
g
g
For underwater photography
h
h
: Custom White Balance
: Custom White Balance
Choose h to adjust white balance for unusual lighting conditions. White balance measure-
ment options will be displayed; frame a white object so that it  lls the display and press the
shutter button all the way down to measure white balance.
• If “COMPLETED!” is displayed, press MENU/OK to set white balance to the measured value.
• If “UNDER” is displayed, raise exposure compensation (P 36) and try again.
• If “OVER” is displayed, lower exposure compensation and try again.
R For greater precision, adjust P FILM SIMULATION, N ISO, and U DYNAMIC RANGE
before measuring white balance.
R At settings other than
h, auto white balance is used with the  ash.
R Results vary with shooting conditions. Play pictures back after shooting to check colors in
the display.