FujiFilm Finepix F660EXR - Power Management; U Date Stamp

106 Menus
The Setup Menu
x
x
POWER MANAGEMENT
POWER MANAGEMENT
(
(
defaults to
defaults to
n
n
)
)
Optimize camera performance for increased battery life or display quality.
Option
Option
Description
Description
n
n
POWER SAVE
POWER SAVE
Reduces display refresh rate. The display dims to save power if no operations
are performed for a short period, but can be restored by operating camera
controls. Select this option to save power.
o
o
CLEAR DISPLAY
CLEAR DISPLAY
Choose this option for a brighter, higher quality display and for a longer delay
before the monitor dims to save power.
R n POWER SAVE does not take e ect when Intelligent Face Detection is on.
U
U
DATE STAMP
DATE STAMP
(
(
defaults to
defaults to
OFF)
OFF)
Stamp the time and/or date of recording on photographs as they are taken.
Option
Option
Description
Description
R
R
+
+
S
S
Stamp new photographs with the date and time of recording.
R
R
Stamp new photographs with the date of recording.
OFF
OFF Do not stamp the time and date on new photographs.
Q Time and date stamps can not be deleted. Turn U DATE STAMP o to prevent time and date
stamps appearing on new photographs.
Q If the camera clock is not set, you will be prompted to set the clock to the current date and
time (P 16).
Q We recommend that you turn the DPOF “print date” option o when printing images with a
time and date stamp (P 71).
Q Time and date stamps do not appear on movies, panoramas, or 3D photos.