40
The self-timer lamp on the front of the camera will blink
immediately before the picture is taken. If the two-
second timer is selected, the self-timer lamp will blink
as the timer counts down.
Intelligent Face Detection
Because it ensures that the faces of portrait subjects will be in focus, Intelligent Face Detection (pg. 30) is
recommended when using the self-timer for group portraits or self-portraits. To use the self-timer with
Intelligent Face Detection, turn Intelligent Face Detection on, set the timer as described in Step 1, and then
press the shutter button all the way down to start the timer. The camera will detect faces while the timer is
counting down and adjust focus and exposure immediately before the shutter is released. Be careful not to
move until the picture has been recorded.
A Note
The self-timer turns off automatically when the picture is taken, a different shooting mode is selected, playback
mode is selected, or the camera is turned off.
J Using the Self-Timer
To Next Page
Loading...
