Problems and Solutions
iiiiiiiiiiiiiiiiiiiiiiiiiiiiii
++++++++++++++++++++++++++++++Power and Battery
++++++++++++++++++++++++++++++P,ob,em • So,ution
++++++++++++++++++++++++++++++
The battery is exhausted: Charge the battery or insert a fully-charged spare battery (9).
Tile camera does not The battery is inserted incorrectly: Reinsert in tile correct orientation (10).
..............................turn on. The battery-chamber cover is not latched: Latch the battery-chamber cover (I0).
++++++++++++++++++++++++++++++ The battery is cold: Warm the battery by placing it in a pocket or other warm place and reinsert it
++++++++++++++++++++++++++++++ in the camera immediately before taking a picture.
++++++++++++++++++++++++++++++ There is dirt on the batteryterminals: Clean the terminals witha sort, dry cloth.
++++++++++++++++++++++++++++++ ON is selected for [] MONITOR SUNLIGHT MODE: Select OFF to reduce the drain on the bat-
++++++++++++++++++++++++++++++The battery runs down tery (+ 4).
++++++++++++++++++++++++++++++quickly, m isselectedforshooting mode: Select I_ mode to reduce the drain on the battery (+ 22).
[] TRACKING isselected for [] AF MODE: Select a different AF mode (50).
isselected for focus mode: Select a different focus mode (48).
The battery hasbeen charged manytimes: The battery has reached the end of its charging life. Pur-
chase anewbattery
Tile camera turns off Thebattery isexhausted: Charge tile battery or insert a fully-charged spare battery (9).
suddenly.
Charging does not start. Reinsert the battery in the correct orientation and make sure that the charger is plugged in (9).
Charging is slow. Charge the battery at room temperature (vi).
The charging lamp lights, There is dirt on the batteryterminals: Clean the terminals with a soft, dry cloth.
but the battery does not The battery has been charged many times: The battery has reached the end of its charging life. Pur-
chase a new battery. If the battery still fails to charge, contact your FUJIFILM dealer.
charge. The battery is too hot ortoo cold: Wait for the battery temperature to stabilize (9).
To Next Page
Loading...
