Charging the Battery
The battery is not charged at shipment.
the battery before use.
1 Place the battery in the charger.
Place the battery in the supplied
charger as shown.
Charge/amp
Charge
battery
Batterycha(qer-
Battery
tery
2
Plug the charger in.
Plug the charger into an indoor power out-
let. The charging indicator will light.
®÷_TheChargingIndicator
Tile charging indicator shows battery charge
status as follows: _
[_i_a2 Battery status Action
Battery not
inserted.
Off
Battery fully
charged.
On Battery charging.
Blinks
Battery fault.
Insert the battery.
Remove the battery.
Unplug the charger and
remove the battery.
3
Charge the battery.
Remove the battery when charging is
complete. See the specifications (_ 125) for
charging times (note that charging times
increase at low temperatures).
_q
Unplug the charger when it isnot in use.
To Next Page
Loading...
