FujiFilm FINEPIX HS30EXR - I_ Auto; Adv. ADVANCED

.f;hootim_Mode
24
%,AdvancedAnt Blur • F-X"-_l_riority
When @ is displayed, tile camera will take a seriesof Select this mode to manually choose from the fol-
exposures and combine them to form a single image, lowing _ modes:
reducing "noise"(mottling) and blur. , . ___(RESOLUTIONPRIORITY):Choose for crisp, clear
shots
@ is available when ON is selected in the shooting • @'_(HIGHISO& 10W NOISE):Reduce noise in pic-
menu (_ 88)and the flash(_ 39)isoffor set to auto. tures taken at high sensitivities.
• k_} (D-RANGEPRIORITY):Increase the amount of
Some time may be required to combine tile expo- detail visible in highlights.
suresintoa singleimage.A singlecombinedimage
maynot becreatedif the subjector cameramoves
during shooting. Keepthe camerasteadyduring
shootinganddo not movetile camerauntil shoot-
ingiscomplete.
Framecoverageisreduced.
TheEXRIcon
When the shutter button is pressed halfway, the
camera chooses the preferred _ mode:
• ___(RESOLUTIONPRIORITY):Produces crisp, clear
shots.
• @'_(HIGHISO& lOW NOISE):Reduces noise in pic-
tures taken at high sensitivities.
• k_}(D-RANGEPRIORITY):Increases the amount of
detail visible in highlights.
DYNAMIC RANGE (_ 86) can be setto
(1600%) and _ (800%).
I_. A UTO
Choose for crisp, clear snapshots. This
mode is recommended in most situa-
tions.
Adv. ADVANCED
This mode combines "point.-and.-shoot"
simplicity with sophisticated photograph--
ic techniques. The [] Adv. MODE op-
tion in the shooting menu can be used
to choose from the following advanced
modes: