5hooting Mode
S: SHUTTER PRIORITY AE
Choose the shutter speed using the
command dial, while the camera ad-
justs aperture for optimal exposure.
rterspeedI
• If tile correct exposure carl not be achieved at the
selected shutter speed,aperture will be displayed in
red. Adjust shutter speed until the correct exposure
is achieved. If tile subject is outside tile metering
range of tile camera, tile aperture display will show
"F---'. Pressthe shutter button halfway to measure
exposure again.
• Tile shutter speed is restricted depending on tile ISO
setting.
A: APERTURE PRIORITY AE
Choose the aperture using the com-
mand dial, while the camera adjusts
shutter speed for optimal exposure.
0_d
If the correct exposure carl not be achieved at the se-
lectect aperture, shutter speed will be displayed in red.
Adjust aperture until tile correct exposure isachieved.
o
If the subject isoutside tile metering range ofthe cam- _,
era,the shutter speed display will show "---'. Pressthe
shutter button halfway to measureexposure again. ,_
33
To Next Page
Loading...
