Using the Flash (Super-Intelligent Flash)
When the flash is used, the camera's Super-Intelligent Flash system instantly analyzes the scene based
on such factors as the brightness of the subject, its position in the frame, and its distance from the
camera. Flash output and sensitivity are adjusted to ensure that the main subject is correctly exposed
while preserving the effects of ambient background lighting, even in dimly-lit indoor scenes. Use the
flash when lighting is poor, for example when shooting at night or indoors under low light.
1 Raise the flash.
Press the flash pop-up button to raise the flash.
2 Choose a flash mode. o
Press the selector right (_). The flash mode changes each time the selector is pressed.
Mode Description
AUTO/_
(AUTOFLASH)
(FORCEDFLASH)
S_/_
(SLOWSYNCHRO)
The flash fires when required. Recommended in most situations.
Tile flash fires whenever a picture is taken. Use for backlit subjects or for natural
coloration when shooting in bright light.
Capture both the main subject and the background under low light (note that
brightly lit scenes may be overexposed).
39
To Next Page
Loading...
