Press the [] button to display
the exposure indicator and
rotate the command dial to
choose a value.
[] Exposure Compensation
Use exposure compensation when photographing very bright, very dark, or high-contrast subjects.
The effect is visible in the display. Press the []
button again to select.
Choose negative values Choose posidve values to
to reduce exposure increase exposure
• A [] icon and exposure indicator are displayed at
settings other than _+0.Exposure compensation is
not reset when the camera is turned off; to restore
normal exposure control, choose a value of_+O.
• Turn the flash off when using exposure compensa-
tion.
46
To Next Page
Loading...
