White Balance
For natural colors, press the WBbutton and choose
a setting that matches the light source.
Option : Description
AUTO
-:÷:-
White balance adjusted automatically.
Measure a value for white balance.
For subjects in direct sunlight.
For subjects in the shade.
Use under "daylight" fluorescent lights.
Use under "warm white" fluorescent lights.
Use under "cool white" fluorescent lights.
Use under incandescent lighting.
®@=O.:CustomWhiteBalance.................................................................................................................................
Choose toad;ustwhitebalanceforunusuallight-
ing conditions. White balance measurement options
will be displayed; frame a white object so that it fills
the LCDmonitor and press the shutter button all the
way down to measure white balance.
• If"COMPLETED!"isdisplayed,press MENU/OKto set
white balance to the measured value.
• If"UNDER" isdisplayed,raise exposure compensa-
tion (_ 46) and try again.
• If"OVER" isdisplayed,lower exposure compensation
and try again.
For greater precision, adjust [] FILM SIMULATION,
iii
ISO, and _ DYNAMIC RANGE before measur-
it-
• At settings other than ,c],,auto white balance is used
with the flash.
• Resultsvary with shooting conditions. Play pictures
back after shooting to check colors in the LCDmoni-
tor.
52
To Next Page
Loading...
