FujiFilm FinePix S1 - Loading the Camera Batteries; Loading the Lithium Batteries; Loading the Button Cell

17
2 Loading the Camera Batteries
1
• Loading the batteries in the wrong direction could cause a camera fault.
Loading the Lithium Batteries
Loading the Button Cell
■ The FinePix S1 Pro Digital Camera uses 2 lithium batteries (CR123A
type), 1 button cell and 4 AA batteries. It can also be run from an
ordinary power socket using the optional AC power adapter AC-5VH.
(See P.128 for information on using the batteries.)
1
Switch the camera “OFF”, slide the open/close catch
on the lithium battery compartment cover in the
direction indicated and open the cover.
2
Load the lithium batteries in the direction indicated by
the + and - labels on the battery compartment cover.
Then firmly close the battery compartment cover.
1
Switch the camera “OFF” and then use a coin to pull
out the button cell holder.