EasyManua.ls Logo

FujiFilm FinePix S1 - Using the AC Power Adapter AC-5 VH (Optional)

FujiFilm FinePix S1
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
1
• To remove the battery adapter, grasp
the catch with your fingers and lift the
adapter out.
Using the AC Power Adapter AC-5VH (optional)
1
Open the lithium battery compartment cover as
described in step 1 in “Loading the Lithium Batteries”.
• When the camera is connected to a personal computer or you are
viewing recorded images on a TV so that the camera is switched on for
an extended period, you should use the AC-5VH.
When you use the AC-5VH, you can load the battery adapter (supplied)
instead of the lithium batteries to prevent the lithium batteries being
depleted.
However, bear in mind that you cannot use the built-in flash when you
are using the battery adapter.
2
Insert the battery adapter as shown in the figure and
firmly close the battery compartment cover.
3
Insert the connection plug for the AC-5VH into the DC IN
5V socket on the camera and plug the AC-5VH into the
power socket.
Notes on using the battery adapter
When you use the battery adapter, use the AC-5VH or AA-size Ni-MH batteries.
Note
• The socket-outlet shall installed
near the equipment and shall
be easily accessible.
• The shapes of the AC-5VH,
plug and socket-outlet depends
on the country of use.
• You cannot charge the
batteries by connecting the AC-
5VH.

Table of Contents

Other manuals for FujiFilm FinePix S1

Related product manuals