Display Name Description
Basic
Normal
(default)
Fine
Hi
This setting records images at the lowest image quality but also
allows the largest number of images to be recorded.
This setting records images at the 3rd highest image quality.
This setting allows more images to be saved than is possible
with the “Fine” setting.
This setting records images at the next highest image quality
after “Hi” and allows more images to be saved than is possible
with the “Hi” setting.
This setting records images uncompressed at the highest image
quality. With this setting, the fewest images can be recorded.
43
2
■ Use the procedure below to set the image quality.
Selecting a high image quality decreases the number of images that
can be saved. Conversely, selecting a low image quality increases the
number of images that can be saved.
1
Press the “FUNC” button.
2
The icon for the quality setting appears on the
rear display panel. Press function button [3].
With the quality set to “Normal”
• The display changes in the cycle shown below each time function button
[3] is pressed.
• The same settings can also be selected by holding down function button
[3] and pressing “
a” on the 4-direction button. You can select settings in
the reverse order by holding down function button [3] and pressing “b” on
the 4-direction button.
To Next Page
Loading...
