FujiFilm FinePix S1 - Setting the Sharpness

Display Name Description
STD
(default)
HARD
OFF
This setting applies the optimum level of sharpness for normal
shots.
This setting sharpens the outlines in an image and is best for
images of subjects such as buildings or text where clarity is
important.
Sharpness processing is not applied in this setting. Use this
setting for images that will undergo image processing for use in
commercial printing.
47
2
Setting the Sharpness
■ Use this setting to soften or sharpen the outlines in an image and to
adjust the quality of the photographed image.
1
Press the “FUNC” button twice.
2
The icon for the sharpness setting appears on the
rear display panel. Press function button [3].
With the sharpness set to “STD”
• The display changes in the cycle shown below each time function button
[3] is pressed.
• The same settings can also be selected by holding down function button
[3] and pressing “a” on the 4-direction button. You can select settings in
the reverse order by holding down function button [3] and pressing “b” on
the 4-direction button.
OFF
STD
HARD
• If you want to view or print the image data directly, do not select “OFF”.
Rear Display Panel