FujiFilm FinePix S1 - Language;Reset; Language; Reset

55
2
LANGUAGE/RESET
Use the procedure below to select the language used only in the “SET-UP”
menu display. (Menus other than the “SET-UP” menu are shown only in
English (default setting) and cannot be set to Japanese-language display.)
1
Press the “MENU/EXE” button.
2
Press “a” or “b” on the 4-direction button to select
“LANGUAGE” and then press “d” or “c” on the 4-
direction button to select the language setting.
3
When you have selected the setting, use “a” or “b”on
the 4-direction button to select “END” and then press
the “MENU/EXE” button.
LANGUAGE
RESET
SET-UP Menu Part 2
This setting resets the settings specified on the color LCD monitor and rear
display panel.
1
Press the “MENU/EXE” button.
2
Press “a” or “b” on the 4-direction button to select
“RESET”.
3
To reset the settings you have selected in the menu,
press the “MENU/EXE” button. The “RESET OK?”
message appears.
• A list of the items that are reset is given on P.56.
4
Press the “MENU/EXE” button to reset the settings. To
retain the current settings, press the “CANCEL” button.
5
When you have selected the setting, use “a” or “b” on
the 4-direction button to select “END” and then press
the “MENU/EXE” button.