FujiFilm FinePix S1 - Protecting and Unprotecting All Images

89
4
Use this setting to prevent images from being accidentally erased.
This procedure can be used to set the protect attribute for all the images on the
media.
1
On the rear display panel, check the media type
containing the images for which protection is to be set
or removed.
For a “SmartMedia”
• To select a different media type, select “MEDIA” in the “SET-UP” menu
(☞P.51).
2
Press the “PLAY” button to display the image.
3
Press the “MENU/EXE” button to display the menu.
4
Press “d” or “c” on the 4-direction button to display
the “PROTECT” menu.
Protecting and Unprotecting All Images