90
Protection Settings - continued
5
Press “a” or “b” on the 4-direction button to select
“ALL” if you want to protect the images or
“UNPROTECT ALL” if you want to remove the
protection and then press the “MENU/EXE” button.
“ALL” is selected
6
Check the confirmation message and then press the
“MENU/EXE” button.
Set protection
• When you press the “MENU/EXE” button, protection is either set or
removed for all the images.
• To cancel the procedure, press the “CANCEL” button.
• A key icon appears in the top-right corner of the protected images.
To Next Page
Loading...
