Need help?Do you have a question about the FujiFilm Fujicascope M3 and is the answer not in the manual?
Learn how to project your library of older format, regular 8mm movies.
Instructions for projecting new, big picture movies from instant load 8mm cameras.
Ensure correct voltage setting and firmly connect the power cord to the projector and outlet.
How to prepare about 15 inches of film leader, ensuring a square cut.
Guide for feeding the film leader through the feed roller and self-threader.
How to open the lamphouse cover and secure it after lamp replacement.
Instructions for safely removing the old lamp and installing a new one.
Steps to diagnose and resolve issues with the projector not turning on.
Solutions for problems encountered during automatic film threading.
Learn how to project your library of older format, regular 8mm movies.
Instructions for projecting new, big picture movies from instant load 8mm cameras.
Ensure correct voltage setting and firmly connect the power cord to the projector and outlet.
How to prepare about 15 inches of film leader, ensuring a square cut.
Guide for feeding the film leader through the feed roller and self-threader.
How to open the lamphouse cover and secure it after lamp replacement.
Instructions for safely removing the old lamp and installing a new one.
Steps to diagnose and resolve issues with the projector not turning on.
Solutions for problems encountered during automatic film threading.
General| Projection speed | 18 fps |
|---|---|
| Forward | Yes |
| Reverse | Yes |
| Auto threading | Yes |
| Frame counter | Yes |
| Motor | DC Motor |
| Reel capacity | 120 m |
| Super 8/Single 8 | Super 8 and Single 8 |
To Next Page