FujiFilm X-H2 - Saving and Loading Settings

116
Connections
5
Saving and Loading Settings
Camera settings can be saved to or loaded from computers
using FUJIFILM X Acquire.
1
Select either AUTO or POWER SUPPLY OFF/COMM ON for
USB POWER SUPPLY/COMM SETTING in the network/USB
setting menu.
2
Choose 5: USB RAW CONV./BACKUP RESTORE for SELECT
CONNECTION SETTING.
3
Connect the camera to the computer via USB and then turn
the camera on (P 108).
4
Launch FUJIFILM X Acquire.
Camera settings can be saved or loaded using FUJIFILM X
Acquire.
N
Visit the website below for information on the software used.
https://fujifilm-x.com/products/software/