FujiFilm X-H2 - Flash Setting; Movie Setting

125
Menu List
6
The Shooting Menus (Still Photography)
FLASH SETTING
To display  ash settings, press MENU/OK in the photo shooting dis-
play and select the F(FLASH SETTING) tab.
Setting
Setting
Description
Description
FLASH FUNCTION SETTING
FLASH FUNCTION SETTING Adjust such settings as fl ash control mode, fl ash level,
and fl ash power.
RED EYE REMOVAL
RED EYE REMOVAL Choose whether to remove red-eye eff ects caused by
the fl ash.
TTL-LOCK MODE
TTL-LOCK MODE Choose a TTL lock mode.
LED LIGHT SETTING
LED LIGHT SETTING Choose whether to use the fl ash unit’s LED video light
(if available) as a catchlight or AF-assist illuminator
when taking photos.
COMMANDER SETTING
COMMANDER SETTING Choose groups when using the camera fl ash unit as a
commander for Fujifi lm optical wireless remote fl ash
control.
CH SETTING
CH SETTING Choose the channel used for communication between
the commander and remote fl ash units.
MOVIE SETTING
To display movie settings, press MENU/OK in the photo shooting
display and select the B(MOVIE SETTING) tab.
Setting
Setting
Description
Description
MOVIE MODE
MOVIE MODE Adjust movie recording settings.
HIGH SPEED REC
HIGH SPEED REC Adjust settings for high-speed movies.
MEDIA REC SETTING
MEDIA REC SETTING Choose movie fi le settings, including destination, fi le
type, and compression.
F
F
IS MODE
IS MODE
Choose whether to enable image stabilization.
F
F
IS MODE BOOST
IS MODE BOOST
Choose the image stabilization level.
AUDIO SETTING
AUDIO SETTING Adjust audio-related settings for movie recording.