FujiFilm X-H2 - Exposure Compensation

86
3
Taking and Viewing Photos
Exposure Compensation
Adjust exposure.
Rotate the rear command dial to adjust
exposure.
N
•
The command dial used in this role can be chosen using D BUTTON/
DIAL SETTING> COMMAND DIAL SETTING.
•
In manual mode, exposure can be adjusted by rotating the front or
rear command dial after pressing a control to which d WHEN SET
TO B(ON/OFF SWITCH) is assigned.
O
•
The amount of compensation available varies with the shooting mode.
•
Exposure compensation can be previewed in the shooting display,
although the display may not accurately re ect its e ects if:
-
the exposure compensation amount exceeds ±3 EV,
-
W 200% or X 400% is selected for DYNAMIC RANGE, or
-
STRONG or WEAK is selected for D RANGE PRIORITY.
Exposure compensation can still be previewed in the view nder or LCD
monitor by pressing the shutter button halfway. In movie mode, the
display may not accurately re ect the e ects of exposure compensa-
tion during F-log recording or when W 200% or X 400% is selected
for DYNAMIC RANGE. An accurate preview can be obtained by select-
ing mode M and adjusting exposure directly.