FujiFilm X-H2 - Introduction and Camera Overview; For the Latest Information

Contents
X-H2  rmware version 4.00 adds or updates the features
listed below. For the latest manuals, visit the following
website.
https://fujifilm-dsc.com/en/manual/
No. Description
X-H2
P
See
P
Ver.
1
1
Command dial settings can now be confi gured for
each of the P, S, A, and M shooting modes. FRONT
COMMAND DIAL 1, FRONT COMMAND DIAL 2,
FRONT COMMAND DIAL 3, and REAR COMMAND
DIAL can now be confi gured as command dial settings.
In addition, FRONT COMMAND DIAL SWITCH has
been added as a function that can be assigned to a
function button.
10
300
307
1
24
28
3.00
2
2
Connection and upload status icons for Frame.io have
been added to the electronic viewfi nder and LCD mon-
itor shooting displays.
14
16
2
3
2.00
3
3
An AirGlu BT connection icon has been added to the
electronic viewfi nder and LCD monitor shooting dis-
plays.
14
16
2
3
3.10
4
4
D SCREEN SET-UP> DISP. CUSTOM SETTING>
IMAGE TRANSFER ORDER has been renamed
COMMUNICATION STATUS and can now be used to
toggle the image transfer order and connected device
displays on or off simultaneously.
23 4 1.20
5
5
An AUTO POWER OFF TEMP. dialog will now be dis-
played during the basic setup.
52 5 4.00
6
6
The borders showing that recording is in progress will be
displayed on the screen during movie recording. Along
with this change, F REC FRAME INDICATOR has
been added under B MOVIE SETTING in the photo
menu and B MOVIE SETTING in the movie menu.
64
183
197
7
9
4.00