25
1
Before You Begin
Camera Displays
Virtual Horizon
Check whether the camera is level. The display type can be cho-
sen using D SCREEN SET-UP> ELECTRONIC LEVEL SETTING.
Use the virtual horizon to level the camera when mounting it on
a tripod or the like.
2D 3D
Pitch Roll
•
OFF: The virtual horizon is not displayed.
•
2D: A white line shows the amount the camera is tilted
left or right. The line turns green when the camera is level.
The line may vanish if the camera is tilted forward or back.
•
3D: The display shows whether the camera is tilted left or
right and forward or back.
N
ELECTRONIC LEVEL SWITCH can be assigned to a function button
and the button then used to switch between the 2D and 3D displays.
To Next Page
Loading...
