FujiFilm X-T5 - Film Simulation Bkt; White Balance Bkt; Y Dynamic Range Bkt; Z Focus Bkt

104
5
Taking Photographs
Bracketing
X FILM SIMULATION BKT
Each time the shutter is released, the camera takes one shot and
processes it to create copies with di erent  lm simulation set-
tings.
V WHITE BALANCE BKT
Select a bracketing amount (±1, ±2, or ±3). Each time the shutter
is released, the camera takes one shot and processes it to create
three copies: one at the current white balanced setting, one with
 ne-tuning increased by the selected amount, and another with
 ne-tuning decreased by the selected amount.
Y DYNAMIC RANGE BKT
Each time the shutter button is pressed, the camera takes three
shots with di erent dynamic ranges: 100% for the  rst, 200% for
the second, and 400% for the third.
N
While dynamic range bracketing is in e ect, sensitivity will be restricted
to a minimum of ISO 500; the sensitivity previously in e ect is restored
when bracketing ends.
Z FOCUS BKT
Each time the shutter button is pressed, the camera takes a series
of photos, varying focus with each shot. The number of shots, the
amount focus changes with each shot, and the interval between
shots can be selected using A SHOOTING SETTING> DRIVE
SETTING> BKT SETTING> FOCUS BKT.
BKT SETTING
Settings for exposure, sensitivity,  lm simulation, white balance and focus
bracketing can be adjusted using A SHOOTING SETTING> DRIVE SETTING>
BKT SETTING.