73
5
Taking Photographs
P, S, A, and M Modes
O
•
If the subject is outside the metering range of the camera, the shutter
speed and aperture displays will show “– – –”.
•
To use the shutter speed dial, press the dial lock release and rotate the
dial to the desired setting.
•
If the lens is not equipped with an aperture ring, select AUTO for
D BUTTON/DIAL SETTING> APERTURE SETTING.
Program Shift
If desired, you can rotate the rear command dial
to select other combinations of shutter speed
and aperture without altering exposure (pro-
gram shift).
Aperture
Shutter speed
O
Program shift is not available in any of the following circumstances:
•
When TTL is selected for F FLASH SETTING > FLASH FUNCTION
SETTING
•
When an auto option is selected for H IMAGE QUALITY SETTING>
DYNAMIC RANGE
•
In movie mode
N
To cancel program shift, turn the camera o .
To Next Page
Loading...
