EasyManua.ls Logo

Fujitsu AIR CONDITIONER DUCT TYPE - Operation; Start and Stop Operation; Set Operation Mode; Set Room Temperature

Fujitsu AIR CONDITIONER DUCT TYPE
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
En-4
OPERATION
AUTO COOL DRY *HEATFAN
AUTO MEDHIGH LOW QUIET
Temperature setting range
AUTO............................................... 18 to 30 °C
COOL/DRY ....................................... 18 to 30 °C
* HEAT ................................................ 16 to 30 °C
Lower Rise
Operation lamp
Air conditioner ON: Lit brightly
Air conditioner OFF: Not lit
Press the START/STOP button.
Press the MODE button to set the operation mode.
If DRY is selected, the fan speed will be set to AUTO.
Press the SET TEMP. buttons to set the room temperature.
Press the FAN button to set the fan speed.
Press the ECONOMY button to start or stop ECONOMY OPERA-
TION.
For details on the function, refer to page 12.
Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).
To start/stop operation
To set the operation mode
l Operation mode setting
l Room temperature setting
l Fan speed setting
ECONOMY OPERATION

Related product manuals