Fujitsu Airstage ASUB36TLAV1 - Page 788

z
SET3-1: Two-stage setting
Cooling setting temperature
(
u
...Factory setting)
SW
SET3-2
Cooling stage 1 setting
Temperature °F (°C)
Cooling stage 2 setting
Temperature °F (°C)
Remarks
u
OFF 68 (20) 64 (18) Pattern 1
ON 72 (22) 68 (20) Pattern 2
Heating setting temperature
(
u
...Factory setting)
SW
SET3-3
SW
SET3-4
Cooling stage 1 setting
Temperature °F (°C)
Cooling stage 2 setting
Temperature °F (°C)
Remarks
u
OFF OFF 81 (27) 86 (30) Pattern 1
OFF ON 77 (25) 82 (28) Pattern 2
ON OFF 75 (24) 79 (26) Pattern 3
ON ON 70 (21) 75 (24) Pattern 4
NOTES:
● Setting values are the limit temperature for cooling and heating.
● Energy saving performance is improved in the order from Cooling Pattern 1 to 2 and Heating pattern 1 to 4.

Delay OFF setting (SET2)
Delay OFF is the function to operate continuously even after reaching to the set temperature of
thermostat. This function may make air conditioning e󰀩cient.
Set the Delay OFF time by SW SET2-3 and SW SET2-4.
(
u
...Factory setting)
SW
SET2-3
SW
SET2-4
Delay o󰀨 time
u
OFF OFF 0 minute
OFF ON 5 minutes
ON OFF 10 minutes
ON ON 20 minutes

Fun setting (Signal on terminal G) (SET2)
(
u
...Factory setting)
SW
SET2-1
SW
SET2-2
Indoor unit airow
u
OFF OFF AUTO
OFF ON HIGH
ON OFF MED
ON ON LOW
- (07 - 141) -
FUNCTION SETTING FUNCTION SETTING