INSTALLATION RESTRICTION OF ELECTRICITY METER
Functions that requires installation of electricity meter
z
Use an electricity meter having the following functions:
・
Electricity charge apportionment function
Install for operation using an electricity meter. (Operation without an electricity meter is also
possible.)
When using an electricity meter, an electricity meter must be installed for all the units which
perform apportionment calculation.
・
Peak cut control function
Installation of an electricity meter is essential.
・
Power consumption graph display function
Installation of an electricity meter is essential.
[Installation example]
Electricity meter
Outdoor unit group
Remote controller group
RB group
Electricity meter
connection range
“Units without electricity meter”
Function which uses an electricity
meter can not be used.
- (07-159) -
FUNCTION
SETTING
FUNCTION
SETTING
To Next Page
Loading...
