Fujitsu Airstage J-II - Page 691

Note
The belows are electricity meter connection methods which can be adapted by the System
Controller. However, the previously mentioned setting restrictions must be observed.
(1) Multiple VRF Networks can connect to 1 electricity meter. (with network crossover)
Note: UTY-ALGX (+UTY-PLGXE1) does not support multiple VRF Networks
VRF Network system 1
VRF Network system 2
VRF Network system 3
VRF Network system 1
VRF Network system 2
VRF Network system 3
Whm
Whm
Whm
Whm
(2) Installation crossing over refrigerant systems is possible.
Whm Whm
Whm
Whm
Whm
(3) Outdoor unit/indoor unit/RB unit mixed in 1 meter is possible.
Whm
- (07-165) -
FUNCTION SETTING FUNCTION SETTING