Fujitsu AIRSTAGE J-IIIL - Separation Tube

3-2. Separation tube
Total cooling capacity of indoor unit (x) (Btu/h) Model name
x < 96,500 UTP-AX090A
96,500 ≤ x UTP-AX180A
NOTE:
¢
I
nstallation
Select the connections with the pipe diameter that match the selected pipe sizes from the Separation
tube, and cut them with a pipe cutter.
0 to 1/8 in (0 to 3 mm)
1/2L
+1
/8
-0
in (
+3
-0
mm)
L
1
/2L
Joint pipe (Branch kit)
F
ield pipe
Standard cutting position:
C
onne
c
tion
s
NOTE: Insert the field pipe firmly until it touches the joint pipe (Separation tube).
When the pipe size of the Separation tube
itself does not match, or when piping sizes differ ever if it
cuts the pipe, use attached reducer or attached expander.
Joint pipe
(
Separation tube)
Field pipeReducer or
Expander
3-2. Separation tube - (06-41) - 3. Piping connection
SYSTEM DESIGN SYSTEM DESIGN