• Central remote controller address (Set N)
Before performing the initial setting, set the Central remote controller address first.
For details, refer to the setting manual.
00 01 02 03
Central remote controller (Max. 16) *
*
1
: Setting up more than one Network convertor in one VRF network system is prohibited.
*
2
: The sum total of the Touch panel controller
, Central remote controller, Network convertor
for Group remote controller, Modbus convertor, and Network convertor for LonWorks is a max-
imum of 16.
1-3. Manual address setting method - (07-14) - 1. System settings
FUNCTION
SETTINGS
FUNCTION
SETTINGS
To Next Page
Loading...
