Fujitsu AIRSTAGE J-IIIL - Function Details

2-9. Function details
Function
Function
number
Setting number
Factory
setting
Details
Filter
indicator
interval
11
00 Standard ♦
Adjusts the filter cleaning interval notification. If the
notification is too early, change to setting “01”. If the
notification is too late, change to setting “02”.
01 Longer
02 Shorter
Filter
indicator
action
13
00 Enable ♦
Enables or disables the filter indicator. Setting “02” is
for use with a central remote controller.
01 Disable
02
Display only on
central remote
controller
Ceiling
airflow
20
00 Standard ♦ Regulates the airflow according to the needs of the
installation location. When set to 01, the air flow will
be stronger. (Cassette type only)
01 High ceiling
Vertical
airflow
direction
23
00 Standard ♦ Adjusts the vertical airflow direction. All airflow
direction louvers are adjusted together. (Cassette
type only)
01 Raise
Horizontal
swing
airflow
direction
24
00 Standard ♦
Adjusts the horizontal swing airflow direction. (For
horizontal swing equipped models)
01 Left half
02 Right half
Static
pressure
26
00 SP mode 00
Range of static pressure mode varies on the indoor
unit models. (For details, refer to "Range of static
pressure mode by model" on page 07-
100).
As for the characteristics of each indoor unit, refer to
"Fan performance curve" in Chapter 4. INDOOR
UNITS on page 04-141.
01 SP mode 01
02 SP mode 02
03 SP mode 03
04 SP mode 04
05 SP mode 05
06 SP mode 06
07 SP mode 07
08 SP mode 08
09 SP mode 09
10 SP mode 10
11 SP mode 11
12 SP mode 12
13 SP mode 13
14 SP mode 14
15 SP mode 15
16 SP mode 16
17 SP mode 17
18 SP mode 18
19 SP mode 19
20 SP mode 20
21 SP mode 21
22 SP mode 22
23 SP mode 23
24 SP mode 24
25 SP mode 25
26 SP mode 26
27 SP mode 27
28 SP mode 28
29 SP mode 29
30 SP mode 30
31 Normal SP ♦
2-9. Function details - (07-96) - 2. Function settings
FUNCTION SETTINGS FUNCTION SETTINGS