Fujitsu AIRSTAGE J-IIIL - Central Remote Controller (UTY-DCGYZ1)

2-14. Central remote controller (UTY-DCGYZ1)
¢ DIP switch setting
DIP switch Memory backup setting
 Switch location
Front case (back side)
Set the DIP switch to ON
 Memory backup setting
DIP switch Factory setting
OFF Disabled ♦
ON Enabled
¢ Address setting
1.
Tap Menu button.
2. Tap “Installer Setting”.
3. Tap “Central controller Address Setting”.
2-14. Central remote controller (UTY-DCGYZ1) - (07-107) - 2. Function settings
FUNCTION SETTINGS FUNCTION SETTINGS